Polaroid 45 Ultra User Manual download pdf (Page 5)

English 6

4 Connect the Scanner to

the Computer

The SprintScan 45 Ultra requires a SCSI host adapter in your

computer. If your computer does not have an adapter, you must

install one (see page 17). If your computer is a PC-compatible

with a SCSI adapter, but the adapter is connected to a hard drive

or CD-ROM drive, installing a second adapter is recommended.

Set the Scanner SCSI Address

Each device connected to a SCSI host adapter must have a unique

address from 0-6. To assure a unique address for the scanner,

determine the addresses of any other SCSI devices.

Make sure the scanner is turned off and set the address switch

(

on page 7) to a value not used by any other device.

Note:

The address is preset to 4. Do not change it unless another

device is using 4. Other addresses typically available are 2,

5, and 6.

Power Mac or PowerPC Windows 95, 98 or NT

Run the Apple System

Proﬁler program, usually

on the Apple menu. If not,

it may be available from

www.apple.com/

swupdates.

Click Devices and

Volumes to view the SCSI

device addresses.

Look at the address switch

on each SCSI device

connected to your system. If

necessary, see the

instructions provided with

the devices.

1 2 3 4 5 6 7 8 9 10 ... 21 22

No comments

Polaroid 45 Ultra User Manual Page 5